Louis Parts
Universal LED Turn Signals
12V/7W
Art. No. 10072665
Important notes
€25.20 1
You have placed the following items in the shopping basket:
Description
Universal LED Turn Signals 12V/7W
An elegantly designed black aluminum housing with a rubber stem and tinted glass. Inside, well-protected, is state-of-the-art LED technology. This is the Louis Parts LED turn signal. E-approved for front and back use.
- black aluminum housing
- tinted glass
- E-approved for front and back
- Dimensions: 40 x 15 x 10 mm
- Threaded bolt: M8 x 1.25 mm
- Connections: Yellow wire = turn signal (+), Black wire = ground (-)
- Watts: 7.0
- Price per piece
- 1 x 12V/7W LED turn signal
- 1 x Installation Instructions
Warning: Choking hazard and risk of internal injuries! Small parts can be swallowed. Keep out of reach of children under 3 years of age.
Manufacturer: Detlev Louis Motorrad-Vertriebsgesellschaft mbH | Rungedamm 35 | 21035 Hamburg | Germany | Tel. 00 49 (0) 40 - 734 193 60 | service@louis.de | www.louis.de
Warning: Strangulation hazard! Danger for children and persons with reduced physical, sensory or mental capabilities (e.g. partially disabled persons, older persons with reduced physical and mental capabilities) or lack of experience and knowledge (e.g. older children)!
Manufacturer details: Louis Parts
Info
The legislator has designated this test mark as the sole proof of legality, i.e., a written report is not required, nor is registration necessary. In addition, however, the applicable guidelines of the StvZO (German Road Traffic Licensing Regulations) must always be observed during installation.
During a traffic check or at the general inspection appointment, the vehicle owner has fulfilled their obligation to provide proof by presenting the test mark. The inspecting officer is then free to check the test mark via the KBA in Flensburg, where all test marks can be decoded.
Original parts on newer vehicles that are factory-fitted with an E-mark may only be replaced with accessories that are also E-approved. For example, an E-approved mirror may not be replaced with one that only complies with German registration law.
Info
Water and salt encourage corrosion. After cleaning (e.g. with Procycle Special Gel Cleaner, Order no. 10004909), we recommend regularly polishing aluminium parts with standard aluminium polish (e.g. Alu-Magic, Order no. 10004031).
Documents
Reviews (3)
Write a review for Universal LED Turn Signals
Terms of use
We offer you the opportunity to rate products purchased from Louis and to share your experiences with them publicly.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Thank you for your review!
It will be checked once more – only product-related contributions will be published. Great that you’re helping others make their decision!
Your previous input will be lost!
Do you really want to cancel your entry?
All versions
Any questions?
+400 brands
2-year right of return
Fast delivery
Worldwide shipping