Kern-Stabi

Adapter Bmw-K, Ducati, Mv F.

DUCATI, MV F. X4 2049

Art. No. 10002686

Important notes

Find your bike:

Bike search

€41.97¹

Description

Adapter Bmw-K, Ducati, Mv F.DUCATI, MV F. X4 2049

Kern-Stabi Adapter for BMW K models, Ducati, MV Agusta

Motorcycles such as the BMW K models, Ducati 1098 and MV Agusta F4 do not have a hollow steering head in the lower triple tree, so they cannot be lifted at the front with a round steering head adapter. However, the attachment supplied enables you to jack up your bike with the Kern-Stabi X4 2049 Spindle Stand 10002685 by using it as a flat support for the lower triple tree (see illustration).
Alternatively, Kern-Stabi also offers a support for the frame tube, directly behind the steering head bearing (Article 10002687). This enables you to inspect the steering head bearing or remove the entire fork, for example. But this adapter is only suitable if the tube does not angle back too much towards the top, directly behind the steering head bearing.

List of compatible motorcycles

Review (1)

of 5 stars

| 1 Review

Reviews

| 0

| 1

| 0

Review by language:

Sort by:

Automatic translations are unfortunately not available currently.

Created on: 15.06.2020

Purchase date: 05.06.2020

Reviewed by: Bart

Is this reliable and applicable for pliable paddock stands?

I bought this item as both my ducati's do not have the hole on the bottom triple

The concept is fine, but the execution makes me doubtful i should use this and rely on it fully..

The protectors that were supplied with the kit are too small to fit the 4 fingers. The rubber sheet to protect the bottom of the triple clamp is too hard and curved. So once you stick it on, it detaches itself by going back to its original curved shape. A less stiff rubber sheet would probably stay in place.

The pin itself that should fit my paddock stand it too large in diameter and maybe a bit too short . I did not check this up front, so i this is on me. It should for sure be added in the specs so you can verify.

I have not been able to check if it works well with the typical pliable paddock stand Maybe others have experience to share. Maybe you need a pin that is fixed in the triple for these kind of paddock stands. This adaptor is not fixed and can still tilt/move underneath the triple when you do the levering of the pliable paddock stand and maybe it will not stay in place which can lead to damage. But this in unverified of course, maybe it works just fine. It could be that it is made for more complicated stands that lift straight up...

Automatic translation

All versions

This, article has no variants

Current calendar week: 23

Last updated: 4 Jun 2025, 20:12

Product	Art. No.	Availability	Price	Actions
Kern-Stabi Adapter Bmw-K, Ducati, Mv F. - DUCATI, MV F. X4 2049	Art. No.: 10002686	Availability: Available The item is usually shipped from Germany within 1-3 working days. Note: Stocks are updated online every hour on working days from 7 a.m. to 8 p.m., so there is a good chance that the products are available if they appear online.	Price€41.97¹	Actions: